Alarme updated !
As you may know, the board managing the core my Alarm set of devices is a Wemos D1 mini. The
Lire la suiteAs you may know, the board managing the core my Alarm set of devices is a Wemos D1 mini. The
Lire la suiteIn a previous article, I was proposing a sketch for an alarm using a movement detector. As I plan to
Lire la suiteHere’s a tool I just bought that will help after any 3D printing to enhance the aspect and nice looking
Lire la suiteHere’s the result of my Wx station with its case 3D printed (1st try). As a novice, found it hard
Lire la suiteNow that I bought a 3D printer, I need to know how to design 3D models. Here are two software
Lire la suiteBack to coding and DIY electronics stuff, at last!!! I decided to buy a ready-to-use 3D printer. Here’s my first print
Lire la suiteThe objective of this article is to present an IoT alarm device. After pressing a push button, a wifi connection
Lire la suiteThe emitter is on the right, associated with the PIR sensor I purchased at Banggood. The receiver is on the
Lire la suiteDesign of MyHome has changed. Check my github and the README file associated for self made gauge using PaintCode and
Lire la suiteAfter searching the web during 3 days and struggling with uploading any code into my ESP-01, I finally succeeded with
Lire la suiteHey everybody, I really wanted to apologize for not giving news or adding new articles. Actually, I’m taking an important
Lire la suiteRelated to my previous article about my Wifi weather station linked to Thingspeak.com, here’s a link to the github of
Lire la suiteSee my github here to check a program to detect a gas leak of your cooker or make sure nobody
Lire la suiteNew feature I just discovered trying to code my ESP8266 Wifi module. First got an account @thingspeak.com. Coded my arduino
Lire la suiteFinal version of my weather station using: DHT11 / Arduino nano / 1 switch to stop displaying data. After a
Lire la suite